Current Price: $56.99
Buy It Now Price: $56.99
Bids: 0

 

 

 
   
 

 12/2018 
17x3  SSL canprojwt2.htm

8, 26 

   You are bidding 
on
Premier model 
Bayonet style camera adapter to Telescope for Prime Focus and
VARIABLE 
Projection Eyepiece Photography as shown in the pictures below. This unit is 
used on all Canon EOS and EOS EF-s digital Canon DSLR cameras


Some of the Compatible models are the Canon 1d 1ds Mark II 
III IV 5D 5D Mark II 7D 10d 20d 30d

40D 50D 60D Rebel XT XTi XS Xsi T1i T2i 300D 350D 400D 450D 
500D 550D 650D 1000D 1100D

If you not sure whether your model will work; Email me.

 

       
 

    This is the actual piece you are bidding on. The 
most left hand side is a Canon bayonet with mount. The center portion is the 
actual VARIABLE Projection Photography Adapter which uses any of your telescope 
eyepieces for projection to your cameras CCD.  One can vary the length of 
the tube to vary the projected image.  The piece to the right is the 
telescope eyepiece adapter.  One just sides this end into the removed 
eyepiece on your telescope.  This piece may also be used alone as shown in the pictures 
below.  The two screws (center) are holding the upper portion in slotted grooves.  When loosened one can vary the length between eyepiece and camera image sensor allowing you to increase or decrease the magnification known as projection photography. The 
single screw (to the right) is used to hold your telescope eyepiece within this adapter.

 

 

       
The device is inserted into your telescope eye piece holder (right end). The 
telescope eyepiece is inside the middle section and is held in place using the 
single thumb screw.  The section to the most left is the piece which is varied in length 
via the two center thumb screws.

 

 
   
   
 
         Telescope eyepiece to be placed inside the Variable Projection Adapter

 

 
   
   
 
Sliding the eyepiece in.

 

 
   
   
 
  Eyepiece in the adapter.
   

 



Fully assembled and attached with T2 (Camera not included)

 


Attached to a telescope.

 

 
   
   
 
 Side shot of attachment.
   

 

 

       
The front piece (right side) can be unscrewed and used in conjunction with the T2 included (see diagrams below) for prime focus photography.

 

       
Assembly for prime focus using the included 
bayonet and front end of piece.

 

 
   
   
 
        Side view of above picture
   

 

       

 

     
       
         
         
       
    This is a picture of a Canon Camera with the front lens removed to show the "EOS - mount" 
        which is a three lug bayonet style mount

 

   

Canon APS-C Camera List:

  • Canon EOS 7D Mark II
  • Canon EOS 7D
  • Canon EOS 80D
  • Canon EOS 70D                     
    year 2013   Live View
  • Canon EOS 60D
  • Canon EOS 50D
  • Canon EOS 40D
  • Canon EOS 30D
  • Canon EOS 20D                      
    year 2006 Not live view
  • Canon EOS 10D
  • Canon EOS 760D/Rebel T6s
  • Canon EOS 750D/Rebel T6i
  • Canon EOS 700D/Rebel T5i
  • Canon EOS 650D/Rebel T4i
  • Canon EOS 600D/Rebel T3i
  • Canon EOS 550D/Rebel T2i
  • Canon EOS 500D/Rebel T1i
  • Canon EOS 450D/Rebel XSi
  • Canon EOS 400D/Rebel XTi
  • Canon EOS 350D/Rebel XT
  • Canon EOS 300D/Rebel
  • Canon EOS 100D/Rebel SL1
  • Canon EOS 1300D/Rebel T6
  • Canon EOS 1200D/Rebel T5
  • Canon EOS 1100D/Rebel T3
  • Canon EOS 1000D/Rebel XS
  • Canon EOS D60
  • Canon EOS D30

  

 

       

 

     
       
         
         
       
    This is a picture 
        of a Canon Camera with the front lens removed to show the "EOS - mount" 
        which is a three lug bayonet style mount

 

    

Canon Full Frame Camera List:

  • Canon EOS 1Ds
  • Canon EOS 1Ds Mark II
  • Canon EOS 1Ds Mark III
  • Canon EOS 1Dx
  • Canon EOS 1Dc
  • Canon EOS 1Dx Mark II
  • Canon EOS 5D
  • Canon EOS 5D Mark 
    II
  • Canon EOS 5D Mark 
    III
  • Canon EOS 5D Mark 
    IV
  • Canon EOS 5Ds / 
    5DsR
  • Canon EOS 6D
  • Canon EOS 6D 
    MarkII

 

 

 

       
Prime focus exploded view to camera.  Camera models may vary in picture 

 

 
   
   
 

Prime focus on camera.

 

 

 


fixed
To 
view my other current auctions now
 

click here. 

 


I also sell most T2s for other camera models 
which means that I can set up the above kit for any digital DSLR or MILC camera 
you have.

 

Standard Bayonet to T2 for SLR 
or DSLR cameras


 Typical Mirrorless T2 adapter shown 
below



I also sell T2 to C mount which screws into all T2-mounts


I also sell Bayonet direct C- Mounts for SLR and DSLR 
cameras. Not available for Mirrorless cameras


 


Please note that a Bayonet mount to T-2 is different for each camera make.  
I sell the following types seperately. 

  1. Canon EOS EF-S to T2 Mount 
    Adapter
  2. Canon FD to T2 Mount Adapter
  3. Nikon F to T2 Mount Adapter
  4. Nikon 1 to T2 Mount Adapter
  5. Panasonic to T2 Mount Adapter
  6. Minolta Maxxam to T2 Mount 
    Adapter
  7. Olympus, Panasonic Lumix, 
    Micro 4/3 (Four Thirds MFT) to T2 Mount Adapter
  8. Olympus, Panasonic Lumix 4/3 
    (Four Thirds ) to T2 Mount Adapter
  9. Pentax PK to T2 Mount Adapter
  10. Sony A mount Single lens 
    Translucent SLT to T2 Mount 
  11. Sony ? (alpha) NEX 3,5,7 Sony 
    Handycam NEX-VG10, NEX-VG20, Sony ? (alpha) 7 & 9 to T2 Mount Adapter. note: all 
    use the Sony E Mount
  12. Canon EOS M EF-M to T2
  13. Samsung, NX to T2 Mount 
    Adapter
  14. Pentax Q to T2 Mount Adapter
  15. Black Magic, Micro 4/3 to T2 
    Mount Adapter
  16. Fuji X to T2 Mount Adapter

16a


 Please note; If you don't see what your looking for ask me.  I add 
items all the time but do not update all my advertisements or sales.

 

 These last two pictures are of a T2 
female with a C-Mount male

 

 


fixed
To 
view my other current auctions now
 

click here. 

 

 

   

 

Canon EOS Adapter 4 Telescope 1.25" Eyepiece VARIABLE 
Projection photography wT2

 


C Mount 1.25" 1.25 inch variable eyepiece projection photography adapter spotting telescope prime focus with w/ T2
T

Filed under: Eyepieces & Accessories