Nexstar USB PC Interface Cable is designed to
control your computerized telescope from a laptop or PC through various
Interface Cable is designed to provide a wired connection to the USB port of
the computer and the hand controller via the RJ9 connector located on the
bottom of the mounts hand controller.
Nexstar USB PC Interface Cable is also required to update the firmware of the
Unlike the proprietary
Celestron Nexstar RS232 cable for Celestron Nexstar USB PC Interface Cable, no
Serial-to-USB adapter is required.
Instead Celestron Nexstar USB PC Interface Cable you may use our
wireless alternatives - StarFi https://www.ebay.com/itm/312653618406 or StarBt https://www.ebay.com/itm/312663712430
Nexstar USB PC Interface Cable is used to connect a laptop or computer to a
computerized NexStar telescope via a port in a hand controller. The USB
connector is connected to the USB port of your computer. The other end of the
cable ends with a plug with a connector for the phone jack and just snaps into
the port on a hand controller designed for this purpose.
After you have
connected your computer and telescope, you can update the firmware of the
manual control. The latest updates can be found at the support section on official website Celestron.
computer to your telescope will also allow you to move the telescope from
different planetarium programs! Today, there are many programs available that
not only display the night sky, as it appears on any chosen observation night,
but this will allow you to send your telescope to any object on the screen at
the touch of a button.
To use the
adapter, you need to first install Celestron
Nexstar USB PC driver.
Windows x64 / x86 Driver XP / Vista / 7/8 / 10
Cable length: 7 meters.
You also can buy such cable by length of 3 meters https://www.ebay.com/itm/312690520496
Filed under: Eyepieces & Accessories