MallinCam Jr Pro EX (1/2 inch ICX428 Ex-View HAD Color Sensor) NTSC. Mint Condition! Very Clean! Just Like New! Comes in Original box and with all of its original accessories! Only used a few times. Works flawlessly!
- Full shutter speed adjustment including OFF, 1/100, 1/120, 1/180, 1/250, 1/350, 1/500, 1/750, 1/1,000, 1/1,500, ½,000, 1/3,000, ¼,000, 1/6,000, 1/8,000, and 1/12,000; there is no need to use an aperture mask to reduce the telescope’s light gathering ability.
- On-board title generator that allows for the placement of the name of the object being viewed on the monitor.
- Long exposure modes including 2X, 4X, 6X, 8X, 12X, 16X, 24X, 32X, 48X, 64X, 96X, and 128X (or 1/32th of a second to 2.1 seconds) and with the new interface built and design by MallinCam using the Pixel wireless exposure control allows exposure from 3 seconds all the way up to 99 minutes, offering a sensitivity rating of better than 0.00000005LUX.
- RS 232 interface offering complete PC camera control
- FULL AGC Adjustment (GAIN) in Auto Mode, Manual Mode (for Deep Sky objects) and OFF (for Deep Sky targets, and Lunar, Planetary, and Solar observing)
- Two fully independent video outputs - high resolution S-Video and 75 Ohm Composite (Both can be used simultaneously!)
- Positive and negative image selection
- Horizontal image inversion (mirror effect)
- Vertical image inversion (mirror effect)
- Freeze image function
- Gamma selection (0.45 or 1.00)
- APC function (Advanced Pixel Control to eliminate all stars artifacts and enhance DSO detail)
- High light adjust function (Electronic Coronagraph and Electronic Stellar Coronagraph)
- Full Digital Zoom (Up to 2X in 16 steps)
- All MallinCam designed and built accessories will fit on the new MallinCam Jr PRO.
- 10.5 ounces (311 grams)
- Made in Ottawa Canada
In the box:
- 1- MALLINCAM Jr PRO (1/2” EXview HAD ccd ceramic sensor (ICX428AKL Color))
- 1- Regulated Power Supply 120 volts to 12 Volts DC Adapter
- 1- 25' (7 Meters) High Grade Dual Shielded Power/Composite Video Cable Combination
- 1- C-mount to 1.25" adapter
- 1- RCA to BNC adapter
- 1- Pixel transmitter and receiver Wireless Exposure control
The bottom of this camera is hand signed by the owner of MallinCam.
Filed under: Eyepieces & Accessories