Tripod Alternatives for Photographers
Tripod Alternatives for Photographers
R. Dodge Woodson
Monopods may be one of the best inventions to come along for outdoor photographers. These stick-like supports do a super job, and they can be packed and carried with ease. Monopods are light in weight, don't take up much room, and can provide a very steady platform for your camera. Don't waste your money on cheap models. Buy a good quality monopod and enjoy it.
Monopods are great for photographers who are covering sporting events, capturing photos of wildlife, or focusing in on a final sunset. A one-legged support can't give you the rock-hard steady platform that a tripod can, but it will provide more than enough support for most types of shots. The big advantage to a monopod is that it is so easy to carry with you that it will be there when you need it, and a heavy tripod may not be.
You can improve many aspects of your location photography by acquiring, or making, support sacks for your camera lens. These devices are available commercially, but they are also easy to make. What is a support sack? It is basically a bag that is filled with some type of moldable material that will conform to the shape of your camera lens. The filling could be styrofoam beads, buckshot, sand, kitty litter, foam rubber, or even pine needles. Since bags that are light in weight are more enjoyable to carry, I would stay away from sand and buckshot as a filler material.
The concept behind support sacks is simple. You place the sack on a solid object, like a rock or the edge of your vehicle, and then nestle the lens of your camera into the sack. Once the lens has settled into the material, you have a very sturdy support for your camera and lens. For a sack to work, you need something stable to place it on, and you are limited by the availability of such places. Another drawback to a sack is that you cannot adjust its height.
Every type of camera support has its own strong points. Sacks are great for photographers who are shooting from their vehicles or who want a low camera angle to capture something close to the ground or floor. This type of support won't do you a lot of good at the zoo or while taking wedding pictures, but there are many times when a support sack is just the right tool for a steady picture.
You can use a variety of clamp devices to secure your camera to all sorts of stable objects. A simple C-clamp that is equipped to thread into the tripod socket of your camera body is great for occasions when you are taking pictures from your vehicle. Install the clamp on a window and mount your camera. Raise or lower the window to change the height of your camera. You can tilt and pan this type of support for more versatility. It's amazing how much help such a simple and inexpensive item like this can be.
C-clamps can be attached to tree branches, railings, windows, and all sorts of other items. However, they are limited in their size, and this can be a problem. For example, you would not be able to get a C-clamp secured on the trunk of many trees. But never fear, tree clamps are available. These clamps circle a tree and provide a very sturdy support for your camera.
When you start to shop of photography accessories, you may be amazed at how many there are. If there is something that you want to do with your camera, you can feel pretty sure that someone is selling something that will allow you to do it.
Tiny tripods may not seem like much of a support system, but even they have their place in good photography. I have a little tripod that has retractable legs. The entire unit has a diameter similar to that of a D-cell flashlight battery. Total length is probably about six inches, when the legs are contained. This itsy bitsy tripod works well for table-top setups and low-to-the-ground shots, but it does require me to hold it. The tripod is not sturdy enough to support a camera and lens safely on its own.
I have found another very good use for my table-top tripod. It can be used as something of a chest-pod. By extending the legs and pressing them into my chest, the little tripod makes an excellent support. The ball-and-socket swivels to put my viewfinder at eye level while the tripod extends outward from my chest. This creates a surprisingly stable shooting platform.
Gun-type grips are another support option for your camera. The device I'm referring to is similar in design to the stock of a rifle or shotgun. Your camera is mounted on the device and is fired by a shutter-release that is incorporated into the system. By pulling the shoulder stock in tight to your body and supporting the extended end with one hand, it's possible to get very steady shots.
If you get caught afield without a commercial camera support, you may have to improvise. Brace your camera or lens against the trunk of a tree to stabilize it. Settle your lens between the forks of a tree or tree branch to hold it still. Use a fence to support the base of your camera. Fences, rails and posts are frequent supports for zoo photographers. If you're doing your photography indoors, a door frame will work as a make-shift support. The back of a chair can be used to steady your lens. If you take the time to look around, you are almost certain to find something that will add some stability to your camera. The few moments spent looking for such a support can mean the difference between a great picture and a blurry one.
About the Author
R. Dodge Woodson is a full-time internationally-known, best-selling author and photographer. Dodge recently entered semi-retirement and created the World Photographers Organization (WPO). Photographers of all skill levels come to WPO to learn, to increase their sales, and to take advantage of the extensive resources offered to the general public and members. He also created an e-commerce site, www.ccionlinesales.com to showcase his brainchild. the Book Buster e-books. The site offers a full selection of Book Busters, e-books, used bound books, new bound books, stock photography, and much more. Having been a pro photographer for more than 30 years and a full-time writer for 17 years, Dodge now feels it is time to share his tricks of the trade with up-and-coming freelancers.
How is a camera mounted on a tripod plate?
I am a novice. I just bought a tripod for my point and shoot camera. (My hands shake when I try to steady the camera.) The instructions with the tripod have nothing on "how to" properly mount the camera on the plate. I have done searches on the 'net. I found a video but could not see the exact position he put the plate onto the camera. What I have read seems to assume "everyone" knows the proper position. I need at least a few closeup photos -
The plate simply screws onto the tripod mount on the bottom of the camera using the attached screw. Straighten the plate with relation to the camera before giving the final, tightening turn (don't over tighten).
If you need to adjust the camera's position on the plate, slacken the screw, adjust the plate and re-tighten.
The plate then clicks in to position on the shoe fitting on the tripod and becomes part of the tripod. To remove the camera, pull the lever or press the button while supporting your camera. The exact method of fitting and release depends on the tripod make and model.
There are a few small cameras that don't have a tripod mounting hole - if this is the case then a tripod cannot be used.
|Ebay has returned a malformed xml response. This could be due to testing or a bug in the RSS2 Generator. Please check the support forums to see if there are any posts regarding recent RSS2 Generator bugs.
No items matching the keyword phrase "Mount Tripod" were found. This could be due to the keyword phrase used, or could mean your server is unable to communicate with Ebays RSS2 Server.
CURL error code = 28. (Operation timed out after 20000 milliseconds with 0 bytes received)
Tagged with: Article Ezine • camera • camera mount tripod • diy • howto • mount tripod machine gun 7.62mm • mount tripod machine gun m122a1 • Night Sky • photography • roof mount tripod • Sky Observer • Source Article • Telescope Mount • Telescope Tripod • tripod • window mount tripod
Filed under: Telescopes