Current Price: $56.99
Buy It Now Price: $56.99
Bids: 0

 

 
   
 
   
 
       
         
         
         

 

  5/2019  17x2 SSL nikprojwt2.htm 
e

2, 26    

         

You are bidding on Premier model Bayonet style camera adapter to Telescope for Prime Focus or
          VARIABLE Projection Eyepiece Photography as shown in the pictures below.

         
           
             
             
           
            This is an exact picture of the adapter you are buying.  It is between the camera an the telescope eyepiece holder; separate pictures shown below. The eyepiece holder is a standard 1.25" telescope eyepiece holder.      Camera and telescope not included.
         

 

           
             
             
           
         
       

 

 

 All Nikon cameras That use the F-Mount should work including 
Film models. The Nikon DX series are easier to use since you can 
see and focus through the view finder screen.

Nikon APS-C Sensors

 In particular the Nikon DX sensors (APS-C). 
Examples
 
are  D1, D1H, D1X, D2H, D2X, D40, DX50, DX60, D70, D80, D90, 
D100, D200, D300, D500, D3000, D3100, D3200, D3300, D5000, D5100, D5200, D5300, D5500 ,D7000, D7100, and D7200. 
 If you're not sure about your specific model Email me and I'll let you know.

 

 

         
           
             
             
           
           
                This is the actual adapter that you are purchasing. Why is this  the Premier model.  The two screws in the center allow you to adjust the projection to your camera imaging sensor.  There are two slots which the screws ride in. You can see one of them at       the center and lower portion of the picture.  So in affect you can chance the amount of the image being projected to the image sensor. 


               

         

 

         
           
             
             
           
         
         This is the same piece as above with parts extended to the sides. From left to right (1,2,&3), the first part is the Bayonet mount which attaches to your camera and   Variable projection eye piece.  The second part is the actual Variable projection eyepiece holder.  You slide your eyepiece  from your telescope into the center and tighten it in place with the one screw to the right of center (see pictures below). Part three is a T2 thread to 1.25 inch telescope mount. It slides into the telescope eyepiece holder.
         

 

         
           
             
             
           
         

  Another picture showing how the whole item assembles on your Nikon camera. 

 

         

         
           
             
             
           
           
             

       

Set up on your camera for Prime Focus.
         

 

         

 

         
           
             
             
           
             Assembled for Prime Focus using piece 1 and 3.
         

 

         

 

         
           
             
             
           
              Below are examples of placing the telescope eyepiece lens in place.  The part actually shown is my STANDARD projection eyepiece holder.  When  used for eyepiece projection photography you place the actual 
              telescope eyepiece inside the adapter.  A thumb screw is provided to stop the telescope eyepiece from moving around.

         

 

         
           
             
             
           
            Dropping in the eyepiece into your adapter
         

 

         
            rh
             
             
           
              Tightening the thumbscrew on side.
         

 

 

fixedTo 
view my other current auctions now
 

click here. 

 


I also sell most T2s for other camera 
models which means that I can set up the above kit for any digital DSLR or MILC 
camera you have.

 

Standard Bayonet to T2 for SLR 
or DSLR cameras


 Typical Mirrorless T2 adapter shown 
below



I also sell T2 to C mount which screws into all T2-mounts


I also sell Bayonet direct C- Mounts for SLR and DSLR 
cameras. Not available for Mirrorless cameras


 


Please note that a Bayonet mount to T-2 is different for each camera make.  
I sell the following types seperately. 

  1. Canon EOS EF-S to T2 Mount 
    Adapter, all EOS  DSLR SLR
  2. Canon FD to T2 Mount Adapter
  3. Nikon F to T2 Mount Adapter
  4. Nikon 1 to T2 Mount Adapter
  5. Panasonic to T2 Mount Adapter
  6. Minolta Maxxam to T2 Mount 
    Adapter
  7. Olympus, Panasonic Lumix, 
    Micro 4/3 (Four Thirds MFT) to T2 Mount Adapter
  8. Olympus, Panasonic Lumix 4/3 
    (Four Thirds ) to T2 Mount Adapter
  9. Pentax PK to T2 Mount Adapter
  10. Sony A mount Single lens 
    Translucent SLT to T2 Mount 
  11. Sony ? (alpha) NEX 3,5,7 Sony 
    Handycam NEX-VG10, NEX-VG20, Sony ? (alpha) 7 & 9 to T2 Mount Adapter. note: all 
    use the Sony E Mount MirrorLess Camera
  12. Canon EOS M EF-M to T2
  13. Samsung, NX to T2 Mount 
    Adapter
  14. Pentax Q to T2 Mount Adapter
  15. Black Magic, Micro 4/3 to T2 
    Mount Adapter
  16. Fuji X to T2 Mount Adapter
  17. Canon EOS R Full Frame Mirror 
    less T2 adapter. Do not confuse with standard EOS
  18. Nikon Z FULL Frame Mirrorless 
    T2 adapter.  Do not confuse with the F mount

16c


 Please note; If you don't see what your looking for ask me.  I add 
items all the time but do not update all my advertisements or sales.

 

 These last two pictures are of a T2 
female with a C-Mount male

 

 

 

fixedTo 
view my other current auctions now
 

click here. 

 

 

* Nikon DSLR  telescope Prime focus & VARIABLE PROJECTION photography adapter *

         

 Olympus Panasonic Micro 4/3 scope adapter Prime focus

         

Olympus Panasonic Micro 4/3 M43 telescope spotting scope adapter Prime focus

         
         

          Pentax PK telescope Prime focus PROJECTION photography adapter spotting scope
         

         

         
           

         
          prime focus eyepiece eye  piece telescope camera adapter telescope adapter telescope eyepiece    digital eyepiece

         
              
           
     

   

Filed under: Eyepieces & Accessories