Current Price: $59.95
Buy It Now Price: $59.95
Bids: 0

 

 
   
 
   
 
       
         
         
         

 

2/2018  17x2 SSL nikprojwt2.htm

2, 26    

         

You  are bidding on Premier model  Bayonet style camera adapter to Telescope for Prime Focus or
          VARIABLE  Projection Eyepiece Photography as shown in the pictures below.

         
           
             
             
           
              This is an exact  picture of the adapter you are buying.  It is between the camera an the telescope eyepiece holder; separate pictures shown below.  The eyepiece holder is a standard 1.25" telescope eyepiece holder. Camera and telescope not included.
         

 

           
             
             
           
         
       

 

 

    
All Nikon cameras That use the F-Mount should work including 
Film models. The Nikon DX series are easier to use since you can 
see and focus through the view finder screen.

Nikon APS-C Sensors

 In particular the Nikon DX sensors (APS-C). 
Examples
 
are  D1, D1H, D1X, D2H, D2X, D40, DX50, DX60, D70, D80, D90, 
D100, D200, D300, D500, D3000, D3100, D3200, D3300, D5000, D5100, D5200, D5300, D5500 ,D7000, D7100, and D7200. 

         
          If you're not sure about your specific model Email me and I'll let you know.

 

 

         
           
             
             
           
                  This is the actual adapter that you are purchasing. Why is this  the Premier model.  The two screws in the center allow you to adjust the projection to your camera imaging sensor.  There  are two slots which the screws ride in. You can see one of them at   the center and lower portion of the picture.  So in affect  you can chance the amount of the image being projected to the  image sensor.   image sensor.  


               

         

 

         
           
             
             
           
         
                   This is the same piece as above with arts extended to the sides. From left to right (1,2,&3), the first part is the Bayonet mount which attaches to your camera and Variable projection eye piece.  The second part is the actual  Variable projection eyepiece holder.  You slide your eyepiece  from your telescope into the center and tighten it in place with  the one screw to the right of center (see pictures below). Part three is a T2 thread to 1.25 inch telescope mount. It slides into the telescope eyepiece holder.
         

 

         
           
             
             
           
         
                   Another picture showing how the whole item assembles on your Nikon camera. Our Nikon camera

 

         

         
           
             
             
           
           
             

             

Set  up on your camera for Prime Focus.
         

 

         

 

         
           
             
             
           
             
             
Assembled for Prime Focus using piece 1 and 3.

         

 

         

 

         
           
             
             
           
               Below are examples of placing the telescope eyepiece lens in  place.  The part actually shown is my STANDARD projection  eyepiece holder.  When  used for eyepiece projection photography you place the actual 
              telescope eyepiece inside the adapter.  A thumb screw is provided  to stop the telescope eyepiece from moving around.

         

 

         
           
             
             
           
           
              Dropping in the eyepiece into your adapter

         

 

         
            rh
             
             
           
           
              Tightening the thumbscrew on side.

         

 

 

fixedTo 
view my other current auctions now
 

click here. 

 


I also sell most T2s for other camera 
models which means that I can set up the above kit for any digital DSLR or MILC 
camera you have.

 

Standard Bayonet to T2 for 
SLR or DSLR cameras


 Typical Mirrorless T2 adapter shown below



I also sell T2 to C mount which screws into all T2-mounts


I also sell Bayonet direct C- Mounts for 
SLR and DSLR cameras. Not available for Mirrorless cameras


 


Please note that a Bayonet mount to T-2 is different for each 
camera make.  I sell the following types seperately. 

  1. Canon EOS EF-S 
    to T2 Mount Adapter
  2. Canon FD to T2 
    Mount Adapter
  3. Nikon F to T2 
    Mount Adapter
  4. Nikon 1 to T2 
    Mount Adapter
  5. Panasonic to 
    T2 Mount Adapter
  6. Minolta Maxxam 
    to T2 Mount Adapter
  7. Olympus, 
    Panasonic Lumix, Micro 4/3 (Four Thirds MFT) to T2 Mount Adapter
  8. Olympus, 
    Panasonic Lumix 4/3 (Four Thirds ) to T2 Mount Adapter
  9. Pentax PK to 
    T2 Mount Adapter
  10. Sony A mount Single lens Translucent SLT to T2 Mount 
  11. Sony ? (alpha) 
    NEX 3,5,7 Sony Handycam NEX-VG10, NEX-VG20 to T2 Mount Adapter
  12. Canon EOS M EF-M 
    to T2
  13. Samsung, NX to 
    T2 Mount Adapter
  14. Pentax Q to T2 
    Mount Adapter
  15. Black Magic, 
    Micro 4/3 to T2 Mount Adapter
  16. Fuji X to T2 Mount Adapter

16


 Please note; If you don't see what your looking for ask 
me.  I add items all the time but do not update all my 
advertisements or sales.

 

 These last 
two pictures are of a T2 female with a C-Mount male

 

 

 

fixedTo 
view my other current auctions now
 

click here. 

 

 

* Nikon DSLR  telescope VARIABLE Projection photography adapter *

         

 Olympus Panasonic Micro 4/3 scope adapter Prime focus

          Olympus Panasonic Micro 4/3 M43 telescope spotting scope adapter Prime focus

                              Pentax PK telescope Prime focus PROJECTION photography  adapter spotting scope
         
          

                                                      prime focus eyepiece eye     piece telescope camera adapter telescope adapter telescope eyepiece    digital eyepiece
         
              
           
     

   

Filed under: Eyepieces & Accessories