Current Price: $200.00
Buy It Now Price: $200.00
Bids: 0

The Orion StarShoot AutoGuider has revolutionized autoguiding and the capture of deep-sky images by mechanizing the tedious and tiring method of manually guiding an exposure, which involved staring endlessly into an illuminated reticle eyepiece while tweaking your mount's electronic drive controls by hand to keep the stars pinpoint sharp. Until now, the problem has always been the lack of a simple, affordable autoguider camera to do the job.Problem solved. The Orion StarShoot AutoGuider provides a user-friendly, dedicated autoguiding system for long-exposure astrophotography. It's compatible with virtually any mount equipped with an autoguider port and comes with the software and cables needed to work right out of the box! The Orion StarShoot AutoGuider sensor is a high-resolution, half-inch format 1.3-megapixel CMOS monochrome chip, with 5.2 micron x 5.2 microns pixels for highly accurate guiding. That high accuracy is due to the small pixel size, and means you can use the Orion StarShoot AutoGuider with a smaller and less-expensive guide scope than is possible with other guide cameras (such as the now-discontinued ST-4). The chip resides in a super-compact, anodized-aluminum housing that measures just 2.5-inches wide by 2.35-inches long and weighs a mere 4.4-ounces. The housing of the StarShoot AutoGuider has a 1.25-inch nosepiece that can be removed to access a T-thread interface. And the AutoGuider's short inward focus requirement of only 15 mm from a typical 1.25-inch Plossl eyepiece makes it compatible with virtually any telescope.The Orion StarShoot AutoGuider and its incredible ease-of-use will appeal to beginning and experienced astrophotographers alike. The included software requires no previous knowledge of autoguiding. This software offers automatic calibration and guiding with literally a single mouse click. The camera is powered via your computer's high-speed USB 2.0 connection with the included USB cable; no other power source is needed. A 6-foot RJ-12 cable is also included to connect the AutoGuider to the mount without the need for an additional RS-232 adapter.Requires PC running Windows 2000, XP ,or Vista 32-bit. Will not run on 64-bit. Item is in great condition, I used this item a few times, but because of my health issues had to give up a few hobbies, Please message me any questions Thank you.

Filed under: Eyepieces & Accessories