Current Price: $26.00
Buy It Now Price: $26.00
Bids: 0

Thousand Oaks Optical SolarLite sheets are commonly used to make home-made solar filters.Thousand Oaks Optical's Sheets, Viewer Cards, and Glasses can be used for naked eye observation of the sun. Safely view the sun anytime and duringall partial phases of an eclipse. Thousand Oaks Optical is the leading manufacturer that has been making safe solar filters for 35 years.Thousand Oaks Optical's exclusive high quality substrates provide superior safety features, sharper solar images, and a pleasing orange solar image.All products meet CE requirements. Only Thousand Oaks Optical has CE and ISO certification. Safe for unlimited visual and photographic use.Transmission: 1/1,000th of 1% (Optical Density 5). - Thousand Oaks Optical products were exclusively chosen by NASA for use aboard Space Shuttles missions.Other professional users include: ABC, BBC CBS, NBC, CNN, NOVA, The Discovery Channel, National Geographic, and most major universitiesand observatories throughout the world. Thousand Oaks Optical uses the latest technology for manufacturing and developing new products.Tens of thousands of their solar filters and millions of their solar eclipse viewers are used world wide.Sheet is shipped in an envelope and does not include a protective case.Since the original roll is 11 29/32" wide, there is a small +/- tolerance on all cuts. 3/16" is usually the max on 1 axis.SolarLite Filter Sheets vs Silver-Black Polymer Sheets FAQsWhat is the difference between Silver-Black Polymer film and SolarLite film?                  Silver-Black is good for up to 100x magnification, SolarLite up to and over 100x.Are the filters completely safe?SolarLite and Silver-Black Polymer Films are completely safe for unlimited visual and photographic (16 f/stop reduction)use when used as instructed. Thousand Oaks Optical filters also protect the camera sensor. Safe to view through the viewfinder with SLR’s thatfocus through the lens. Solar filter MUST be first in line from sun and in front of any telescope or camera lens or mirror.Filter should NEVER be used behind any lens, eyepiece or finder. This includes camera drop in holders behind lens.TECHNICAL DETAILS:CARE & USE INSTRUCTIONSSOLAR FILTERS White Light (580-630nm)SolarLite Film: Metallic coating outside surface & absorptive material within substrate.All filters block 99.999% of the energy from entering the instrument. For visual and photographic use.Consistent yellow-orange solar image, even density with any aperture, and flat surface compared to other thin film filters that have wrinkles and creases.Stronger than any other solar film on the marketIMPORTANT:Check the solar filter for damage before each use.The filter must be FIRST in-line between sun and instrument. Do not use filter behind any lens.Truss design telescopes must NOT be used without covering the open section of tube. Sunlight entering from the side will reflect off mirror anddamage the solar filter.Secure filter properly. (See mounting instructions)Do not leave instrument unattended where a child or inexperienced adult could point it at the sun without the filter properly attached.Keep the finder-scope covered if not equipped with a proper solar filter.Point the instrument away from sun when attaching and removing solar filter.Do not place the filter up against a smaller instrument. The end of the tube will damage the filter.When looking through the focusing tube without an eyepiece, there may appear to be small defects inthe coating that are not seen when observing through the eyepiece. This is normal and is not a coating defect or safety concern.“Ghosting” can occur due to internal reflections (glass filters only). If this is a problem, simply tilt the filter slightly.Filter may absorb solar energy and get hot during use. Use extra care when removing.Pinholes and minor surface scratches are common in glass solar filters; however, Thousand Oaks Optical multi-coating technique keeps them to a minimum.A “bright” pinhole in the coating may cause “ghosting” due to scattered light. If this is seen during observation, the pinhole(s) should be blocked out.Block out any pinholes on inside surface facing telescope. Hold the filter 1-2 feet in front of a 50-100 soft white light bulb.Blocking can be done using a fine point felt marker. There is no danger if a few pinholes or minor scratches are present.The touch-up(s) will not lessen the optical performance.Small pinholes need not be blocked if not causing an image problem.TIPS:Allow instrument and filter to equalize to the outside temperature for at least 15 minutes.If possible, do not view over pavement or buildings. Viewing over grass or water will help avoid heat currents that will degrade the image.Cover dark colored instruments with a light colored cloth.CLEANING:Glass: Loose dust can be blown off with up to 15 PSI. Clean with Isopropyl (rubbing) alcohol and a soft tissue.Do not use a cloth. It’s best to mist the filter with a spray versus soaking the tissue. Use a 3 inch or larger circular wad of tissueand lightly rub across surface using long strokes. Lightly wipe dry with a fresh dry tissue.SolarLite & Silver-Black Polymer Film: Same as glass, however, polymer is more susceptible to small surface scratches, so extra care should be taken.Surface scratches will not compromise the safety.WARRANTY:SolarLite 15 years, Black Polymer 10 years. All filters are covered by a limited liability warranty from defects in material and workmanship.This warranty does not apply if, in the judgment of Thousand Oaks Optical, the product fails to be safe due to shipping damage,damage from improper handling or storage, abuse or misuse, or has been used or maintained in a manner not conforming to product’s instructionsor has been modified in any way.FINDER:Looking at the sun without a proper solar filter can damage your eye in a fraction of a second.If you do not have a solar filter for the finder, keep it covered.

Filed under: Eyepieces & Accessories