Current Price: $29.50
Buy It Now Price: $29.50
Bids: 0


SVBONY Red Laser Collimator for Newtonian Reflector Telescope Alignment 1.25 inches 7 Bright Levels Triple Cemented Lens with 2 inches Adapter


No telescope can align its optical axis for a long time,
even if it is already factory calibrated. The Newtonian reflection telescope
is very sensitive to the optical axis; a slight movement of the calibration
screw can deflect the entire optical axis Its precision is so high that it
goes out in the car, the optical axis will have a small deviation, and
sometimes it will completely collapse. Even if the lens barrel is pointed
differently, the optical axis will be different. (An interesting experiment is
to point the same star through the equatorial mount, then move the equatorial
mount's right ascension axis from left to right through the field of view to
observe the optical axis. Offset). This is why you should choose a star to
calibrate, not the target of interest (Jupiter or Moon). If you observe deep
space, you feel that the slight deviation can be tolerated, and then you will
not be calibrated when you turn to planet observation. This is actually very
risky. The good way is to check the optical axis before each observation, just
like checking the mailbox and the tire before driving far away. SVBONY Laser
Collimator 1.25'' Metal with 2" Adapter SVBONY Red Lasor Collimator Using
Methods: The process of calibration is repeated (check-adjust-check-
adjust....). In addition to the following points, there is no difficulty or
risk in the whole process: - The big screw in the middle that fixes the
secondary mirror, never touch it. -The three fine-tuning screws should be very
gentle when screwing in and out, not too loose or too tight - If you screw one
of the screws out, the other two will be screwed in. - When rotating, be sure
to move small: a very irregular mirror can be rotated half a turn at a time,
but the final adjustment is still very small. - Every time the rotation, the
star will move because of this adjustment, it must be pulled to the center
again. For Newtonian reflection telescope , calibration usually takes two
steps: first adjust the secondary mirror to the appropriate position (using
the calibration eyepiece), then adjust the primary mirror It's great for a
student, you will need it when you are learning astronomy class or when
attending an astronomical society in college or school SVBONY Laser Collimator
for Newtonian Telescopes 7 Level Ajustable Brightness Beam Aim at the target
anytime,anywhere,even during the daytime can also be used normally. 7 settings
of brightness is useful and easier on the eyes and great for different areas
of light Removable 2" adapter This is a newest 1.25" laser collimator includes
removable 2" adapter;the triple cemented lens to improve the stability of
dot;it's designed for accurate collimation of all Newtonian and SCT reflector
telescopes Easy to target It is very easy to simply look at the laser target
and adjust the telescope until the red dot is centered. no need to keep
looking at the cap in the telescope's eyepiece Read more Read more Package
List: 1×SVBONY Laser Collimator for Mirror Reflector Telescopes 1×2-inch
Adapter Sleeve 1×English User manual Warning: Do not look directly into the
laser beam! Permanent eye damage may result! Avoid prolonged skin exposure to
laser rashes or burns may occur! Specification: Name: Laser Collimator Fit
Type: Newtonian and SCT reflector telescopes Body Material: Metal Net Weight:
135g/4.79oz Note: The Best working distance is two meters Read more SVBONY
SV105 Digital Telescope Camera SVBONY 68 Degree Ultra Wide Angle Eyepiece
Set(6mm 9mm 15mm 20mm) SVBONY 66 Degree Ultra Wide Angle Eyepiece Set (6mm 9mm
15mm 20mm) SVBONY Wide Angle 72 Degree Eyepiece 18mm New Generation model
makes the spot shape a dot Adjustable Collimation Eyepiece SVBONY Universal
Cell Phone Adapter Support Eyepiece Diameter 25 to 48mm


  • SVBONY user adjustable laser collimator;allows anyone easily collimate 1.25'' and 2'' reflector telescopes;come with removable 2" adapter;built with metal material;make alignment no longer boring and time consuming
  • Easy to use;accurate collimation in a few minutes provide a more clearer image;no longer have to go back forth;just watch the collimator from the mirror end of the scope and adjust the screws
  • 7 brightness levels red laser beam;adjustable brightness;suit for different light conditions;amazing alignment in dark and day;so can get the better views possible from your reflector telescope
  • High quality solid metal body;for a long term use;CR2032 battery included and comes with a full set of instructions with a step by step procedure on how to properly align a relfecting telescope
  • Lifetime warranty;we confidently promise lifetime warranty for every one bought from us

Product Details:

  • Product Dimensions: 8.5 x 3.5 x 2.4 inches
  • Item Weight: 9.9 ounces
  • Shipping Weight: 11.2 ounces
  • Item model number: 4331908576
  • Batteries: 1 Lithium Metal batteries required.
  • Handling

    We will ship all orders within 1 business day of payment.

  • Delivery

    We Do Not Ship P.O BOX AND Outside of the Continental US.

  • Return Policy

    All items qualify for returns within 30 days of receipt. Buyer is responsible for return shipping on any item that is not damaged.

  • Feedback

    We take our reputation seriously, we buy and sell online, so we understand the value of trust. If you are unsatisfied with your order, please contact us and we will work with you to resolve it to your satisfaction.

Filed under: Eyepieces & Accessories