Current Price: $49.00
Buy It Now Price: $49.00
Bids: 0

SynFiAZ WiFi adapter for wireless control of AZ mounts of SkyWatcher ORION

SynFiAZ is a wireless adapter for direct control of AZIMUTHAL mounts of SkyWatcher, ORION telescopes.

Connect SynFiAZ instead of SynTrek or SynScan hand controller and get the wireless GoTo!!!

The WiFi module works only in the «access point» mode.

With this adapter you can provide full control over the telescope via Wi-Fi from the PC, laptop or mobile device.

On the PC, to control the telescope, you can use any planetarium software compatible with ASCOM, such as Stellarium, Cartes Du Ciel, Maxim DL, and SynScan app for Windows. Also, you should install ASCOM Driver for SynScan App.

On the mobile device, to control the telescope, you can use:

  • SynScan app (download and install it from App Store or Google Play);
  • SkySafari Plus or SkySafari Pro.

GETTING STARTED

First, attach the SynFiAZ Wi-Fi Adapter (RJ12 Jack) to the «Hand Control» port.

SynScan App connection mobile:

  1. Download the SynScan app from the App Store or Google Play;
  2. Connect the adapter to a Skywatcher telescope mount and turn the power on;
  3. Connect to SSID «SynFiAZ» in the Wi-Fi list available on your smartphone;
  4. On iOS device, wait up to 1 minute until the Wi-Fi icon appears in the notifcation bar;
  5. Open the SynScan app on your smartphone and tap on the «Connect» button at the top. Your SynScan App will setup connection to the adapter and the mount.

SkySafari connection:

  1. After downloading the program, go to Settings, «Settings» button;
  2. Scroll down to «Telescope» section and click on the «Setup» button;
  3. Select the type of equipment used «Scope Type - SynScan» and type mount «Mount Type - Equatorial Goto (German)», also select the wireless connection type in Section Communication Settings - «Connect via Wi-Fi»;
  4. In «IP address», type «127.0.0.1» address;
  5. In the «Port» field, type «11882» value;
  6. Return to the main menu and press the «Connect» button.

SynScan App connection on the PC:

  1. Download and install «SynScan app» for Windows;
  2. Connect the adapter to the Skywatcher telescope mount and turn the power on;
  3. Choose and connect «SynFiAZ» in the Wi-Fi list available on your PC;
  4. Open the «SynScan app» on your PC and tap on the «Connect» button at the top, your SynScan App will setup connection to the adapter and the mount.

Control telescope on the sample program CDC planetarium for PC:

  1. Download and install the SynScan ASCOM driver on your PC;
  2. Start the CDC planetarium. In the ASCOM settings select «SynScanMobile Telescope»;
  3. Return to the main ASCOM menu and press the «Connect» button.

Filed under: Eyepieces & Accessories